protections:short circuit/over load/over voltage cooling by free air convection led indicator for power on all using 105c long life electrolytic capacitors withstands a 5g vibration test high effciency, long life and high reliability model number output volts output amps ripple & noise min load dc volt adjust load reg volt tolerance single output rs150-3.3 3.3 volts(dc) 30 amps 80mv pk-pk 0~30amps 3.2~3.5volt(dc) 2.0% 3.0% rs150-5 5 volts(dc) 26 amps 80mv pk-pk 0~26amps 4.75~5.5volt(dc) 1.0% 2.0% RS150-12 12 volts(dc) 12.5 amps 120mv pk-pk 0~12.5amps 11.4~13.2volt(dc 0.5% 1.0% rs150-15 15 volts(dc) 10 amps 120mv pk-pk 0~10amps 14.25~16.5volt(dc) 0.5% 1.0% rs150-24 24 volts(dc) 6.5 amps 120mv pk-pk 0~6.5amps 22.8~26.4volt(dc) 0.5% 1.0% rs150-48 48 volts(dc) 3.3 amps 200mv pk-pk 0~3.3amps 45.6~52.8volt(dc) 0.5% 1.0% 150w single output switching power supply rs150 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range 88~132vac / 176~240vac selected by switch 248~373 volts(dc) frequency range 47-63 hz inrush current, typ: (cold start) 40amps / 230vac input current 3.0 amps. @ 115vac 2.0 amps. @ 230vac leakage current < 2mamps /240vac min load see selection chart output specifications voltage and current see selection chart line regulation (note 3) 0.5% load regulation (note 4) see selection chart voltage tolerance (note2) see selection chart ripple/noise (note 1) see selection chart hold up time @ fl 28ms/230vac 20ms/115vac setup, rise time @ fl 800ms, 20m/230vac 1200ms, 30ms/115vac over voltage protection 3.8 ~ 4.45volt(dc): 3.3volts(dc) 5.75 ~ 6.75volt(dc): 5volts(dc) 13.8 ~ 16.2volt(dc): 12volts(dc) 17.25 ~ 20.25volt(dc): 15volts(dc) 27.6~ 32.4volt(dc): 24volts(dc) 55.2~ 64.8volt(dc): 48volts(dc) hiccup mode, auto recover over current protection 110 ~ 150% rated output power hiccup mode, auto recover dc volt adjust see selection chart general specifications safety ul60950-1, tuv en60950-1 approved insulation resistance 100m? / 500volts(dc) emi compliance to en55022 (cispr22) class b harmonic current compliance to en61000-3-2,-3 effciency 74% (rs150-3.3) 78% (rs150-5) 83% (RS150-12) 84% (rs150-15) 86% (rs150-24) 87%(rs150-48) isolation 3000vac input - output 1500vac input - ground 500vac output - ground ems compliance to en61000-4-2, 3, 4, 5, 6, 8, 11; env50204,en61000-6-2(en50082-2) heavy industry level, criteria a environmental specifications oper. temperature -25c to +70c (see derate curve) storage temperature -40c to +85c, 10~95% rh relative humidity 20~90% rh non cond temperature coeffcient 0.03% / c (0-50c) mtbf 244khrs min,mil-hdbk-217f(25c) vibration 10~500hz, 5g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 199 x 98 x 38 inches 7.83 x 3.86 x 1.50 weight 21.16 oz (600g) note 1. ripple & noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. tolerance : includes set up tolerance, line regulation and load regula - tion. 3. line regulation is measured from low line to high line at rated load. 4. load regulation is measured from 0% to 100% rated load. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted 150w single output switching power supply rs150 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
150w single output switching power supply rs150 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
150w single output switching power supply rs150 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|
